ELECTRICAL ENGINEERING  (EE) - LABORATORY

Year of establishment: 2000
B.Tech. in Electrical Engineering (4 years)
Year of commencement: 2000
Current Intake: 120
M.Tech. in Power System Engineering (2 year)
Year of commencement: 2009
Current Intake: 18

View EE Labs, BCREC
View EE Department project lab

Name of the Department - Electrical Engineering dept.       SL NO Name of the laboratory Name of equipment/software/item etc. 1 Basic Electrical Engg. Lab i)     Single phase  transformer-1    (ES EE-191) (1KVA 110/220V, 50Hz)     (Quantity: 4)           ii)     Single phase Transformer-2            (2KVA, 115/220/230V,             50Hz)     iii)    Control panel for open circuit characteristic of a DC shunt Generator along with motor generator set         iv)      Panel for experiment for Three phase induction motor using DOL and star-delta starter     v)     DC kits for verification of Network theorems in DC circuit (make: Omega, Model : ETB64)      (Quantity :4)     vi)   Experimental setup for Torque speed characteristics of separately excited DC Motor     vii)  Experimental setup for calibration of ammeter and voltmeter     viii)          Measurement of three phase power by using two wattmeter method     (4kW/415V/5A three phase bulb type step variable load box fitted in a box mounted on wheels)     ix)   Experimental setup for determination of resonance frequency and quality factor of Series & Parallel R-L-C circuit     x)     Experimental setup for Torque speed characteristics & speed reversal by change of phase sequence of Induction Motor     xi)   Experimental setup for steady state response of R-L, R-C, & R-L-C & calculations of impendence & power factor.     xii) Demonstration of cut of section of machines  D.C Machine, Induction Machine, Transformer etc 2 Power Electronics Lab i)     Study of UJT & UJT Relaxation Oscillator (EE693)     (Quantity: 2)       ii)    Study of buck chopper   (Quantity: 1)       iii)  Trainer Kit for study of SCR characteristics.   (Quantity: 2)   iv)  Phase control rectifier using SCR kit.   (Quantity: 2)       v)     TRIAC characteristics trainer kit with power supply   (Quantity: 2)     3 Electric Drives hardware Lab      i)     PLC based trainer kit with three phases IM & PC.   (EE-791)           ii)   SCR controlled for separately excited DC Motor – DC Shunt Generator               iii)   Single phase AC Induction motor speed control using TRIAC kit           iv)   Three phase IM speed control by  V/f controller 4 Simulation Lab-I Desktop computer (EE 693 s/w (Quantity-30) EE 791 s/w   EE 592 s/w)     Central UPS (500kVA)   Model no: LIEBERT 5 Simulation Lab-II Desktop computer(Quantity-31)   (EE 692 s/w) 6 Simulation Lab-III  Desktop computer   (EE 593 s/w (Quantity-25)   EE 691 s/w)         7 Charles Babbage Lab        Computer    (EE 391)        (Quantity-30) 8 Electrical Machine Lab i)     DC Power Supply with AC Power Supply Panel (maker: Thermocon   (EE 491  a. 220V, 50 A, DC power supply   EE 591) b.    0-220V, 40 A DC variable power supply     c.    415/220V, 50 Hz ac power supply)     ii)   Single phase Induction Motor(1/2 H.P, 1440 rpm, 220V, Class B)         iii)  Three phase Squirrel Cage Induction Motor     (Make: Kirloskar Electric 2.2kW, 3 HP, 4.7 A 420 rpm 400V)           iv)  Synchronous Motor-Shunt Generator Set           (Synchronous Motor Maker: General Electric company ltd.           3HP, 400V, 4.5A, excitation voltage 220V DC)           (Shunt Generator Maker: General Electric company ltd.           2HP, 220V, 6.8 A, 1450 rpm)                       v)   Induction Motor – DC Generator Set     (Induction Motor Maker: Kirloskar Electric, Three phase,2kW, 440V, 4.5A, 1440 rpm)     (DC Generator Maker: Crompton Pakinson, 1.5kW, 220V, 7A, 1450 rpm)     vi)  Slip ring Induction motor -DC Generator Set     (Induction motor Maker: AEI works, 2kW, 400/440V, 4.5A, 960 rpm)     (DC generator Maker: The British Thomson Houston Company Ltd., 2kW, 220V, 10A, 950 rpm)     vii) DC motor-generator set           (DC motor            Make: Crompton Parkinson, 2 BHP, 220V, 8 A, 1250 rpm)           (DC Generator            Make: Crompton Parkinson, 1.5kW, 220V, 8 A, 1450 rpm)                       viii) DC shunt motor- separately excited DC generator set           (DC motor           Make: Thermokon, 2 BHP, 220V, 13 A, 1500 rpm)           (DC Generator           Make: Thermokon, 1.5kW, 220V, 5 A, 1500 rpm)     ix) DC shunt motor-  DC compound generator set           (DC motor           Make: Thermokon, 2 BHP, 220V, 13 A, 1500 rpm)           (DC Generator ,Make: Thermokon, 1.5kW, 220V, 5 A, 1500 rpm)     x) DC shunt motor- 3 phase Alternator set           (DC motor           Make: British Thomson Houston company limited, 3 BHP, 220V, 12 A, 1500 rpm)           (3 phase Alternator, Cylindrical type         Make: : British Thomson Houston company limited, 1.5kVA,     400V,Exct Volt-220V DC, 2.5 A, 1500 rpm)     xi) DC shunt motor- 3 phase Alternator set           (DC motor           Make: British Thomson Houston company limited, 3 BHP, 220V, 12 A, 1500 rpm)           (3 phase Alternator, Salient pole type           Make: : British Thomson Houston company limited, 1.5kVA, 400V,Excitation Voltage-220V DC, 2.5 A, 1500 rpm)     xii)Control panel for synchronization of Alternator set     xiii) Universal motor  with belt and pulley arrangement(0.5 HP, 220V , 2 Amp,1500 RPM)     xiv)  Single   phase transformer 1KVA   (1kVA, 220/100V, 50Hz) (Quantity: 4)           xv) Three  phase     Bank type transformer     (Each1kVA, 440/220V, 50Hz)     xvi) Three phase inductive load box     (Five steps, Max. Rating 5A)     xvii) Three phase Resistive load box -2 pieces.     (Four steps, Max. Rating 5A)     xviii) Single phase Resistive load box .     (Six steps, Max. Rating 20Amp, 1No )     xix) Single phase Resistive load box.     (Four steps, Max Rating 10 Amp,3 Nos) 9 Electrical Measurement Laboratory  i) Kelvin Double Bridge (EE 492) (MAKE:  Oxford Industrial    Range: 0.2 µΩ to 11 Ω )       ii)      Anderson Bridge   (MAKE:  Omega Electronics    Type: ETB31 )   (Quantity :5)   iii)    De Sauty’s Bridge   (MAKE:  LAB Electronics )     (Quantity : 4)   (MAKE:  OSAW )     (Quantity : 2)           iv)    Wein Bridge (MAKE:  Omega Electronics )     (Quantity : 3)   v)      Schering bridge(MAKE:  Lab Electronics )            (Quantity : 2)       vi)       Instrument Transformer (PT & CT)              (PT: 440/110V, 10VA Quantity: 2              CT: 50/5A,5VA, 50Hz              Quantity: 3 )              CT(5A/1A,15VA)(10A/5A,15VA)                 PT(300V/100V,50VA)               Potentiometer Assemble Kit 10 Power System Lab-I (EE 592) (H/W) i) ABCD Constant Determination of 600 KM long Transmission Line & Ferranti Tripping Device     (Make: Control system engineering)           ii)        Manually operated high voltage oil test set     (Make: Sruti Electronics     Input voltage: 230V, 50Hz, single phase, output: 0~70kV , capacity: 1400 VA)           iii)       Earth tester  hand driven generator type four terminals in four ranges with stand test kit     (Make: CIE, range: 0-2/10/100/1000 OHMS )     Vi) AC high voltage test set(Make: Sruti Electronics     Input voltage: 230V, 50Hz, single phase, output: 0~70kV ,leakage current: 50mA, duty cycle: 5 min ON/ 5 min OFF )           Vii) Tan-delta test kit     (Make: Sivananda Electronics      Test voltage: 0~600V, ac, 50Hz, resistance range: 10MΩ to 109 MΩ) 11 Power System Lab-II      i)   Relays Test Set (Make: sruti electronics, input voltage 415 V  ,   (EE 692) (H/w)        Three  four wires  50 Hz ac, output test current 0~1,5,10,25,50,100, 200A           Test voltage: 2~300V(L-N), ac 50Hz           Test Voltage: 0~240V, dc, maximum capacity 2.5A  )           ii)  Polarity, ratio and magnetic test of CT and PT (Make: Sruti Electronics        Input voltage 230V, single phase, 50Hz ac,   output: current 0~100A of capacity 500VA    output: voltage: 0~100V, ac at capacity 1000VA            output: voltage: 0~500V, ac at capacity 1000VA)     iii)  Protection scheme of three phase IM motor using Micom Relay P220.         12 Control system  i)       Linear system simulator   (EE 593) (Make: Testing instruments mfg. Company , Model no: LSS01  )   (H/W) (Quantity: 2)     ii)     Temperature control by P, PI, PID controllers     (Make:  Instruments mfg. Company ,     Model no:TCS01  )     (Quantity: 2)     iii)   Compensator Design     (Make: Techno Instruments,     Model No. : CD02)     (Quantity: 2)     iv)   P, PI, PD, PID controller     (Make: Techno Instruments,          Model No. : PID01)     (Quantity: 2)     v)     Stepper Motor study     (Make: Techno Instruments,      Model No. : SM03)     (Quantity: 2)     vi)   DC speed control     (Make: Techno Instruments, Model No. : DCS01)     (Quantity: 2)     vii)  DC position control     (Make: Techno Instruments, Model No. : DCP01)     (Quantity: 2) 13 Circuit Theory Lab (H/W)  i) Passive filter   EE 391 a)      Electronics Training Board on Passive Filters       (OMEGA type B-33)           b) Function Generator     (HM5030-4 digital)            Two Port Network  set     a)      Transformer 1 kVA Max. current 4.3A     b)      AC ammeter (0-2.5-5A) & (0-1-2A)     c)      AC  voltmeter (0-150-300V)           Thevnins and Nortons Theorem           (Quantity-2)       14 M.Tech Software Lab Desktop Computer     (Make: HP)     (Quantity-6)           Printer     (Make: HP)